PLENTI'S NANO 4 CERAMIC & GLASS is an excellent product based on nanotechnology used for protection of surfaces made from ceramic and glass with following characteristics:

1. Duration of protection up to two years!
2. Maintaining without cleaning products – saving up to 70%!
3. Ecologically suitable and desirable protection!
4. Maintaining only with water and damp cloth!
5. Saving time for maintaining protected surfaces – up to 90%!
6. Without scent, colour, poison and damaging ingredients!
7. Protects the surfaces and extend their lifetime!

The liquid for ceramic and glass protection contains intelligent nano particles. After nano particles are being applied and spread on the prepared surface, by quality polishing required temperature and energy are released which allow nano particles to merge with surface on a molecular level.
That way, extremely smooth surface of condensed particles has been created, which does not allow liquid or dirt to pass through. The liquid stays in its original form (drop), it does not spill but the drop just slide under certain angle while the dirt and scale remain on the surface waiting for a little stimulation to vanish – a little bit of water or a damp cloth.

Every set contain two bottles. Red one is for surface preparation, and the green one contains nano particles and is used for protection.

1. Shake well NANO preparation (bottle with the red label).
2. Pour the product on a sponge and apply with circular movements on the whole surface.
3. Leave for a few minutes, and than polish with the clean cloth or rinse with water. Do not touch the surface with fingers! Dry it well.
4. Shake well NANO protection (bottle with green label).
5. Spray the product on accompanied cloth for polishing and by circular movements rub it in on the whole surface.
6. Leave for a few minutes, and than polish with the clean cloth. Polish it for 4-5 minutes!
7. Let the surface dry for 1-2 hours. Do not wash it and avoid any contact with water or hands.
8. Afterwards, use the surface freely, the protection won’t be ruined.

Application

Ceramic tiles, wash basins, bath tubs, lavatory, mirrors, cabinets etc.

Important

1. The product is for interior ceramic and glass surfaces!
2. Products are not allowed to dilute! 7-10 ml is enough for 1 m2!
3. Store on dry and dark place, avoid direct sunlight.
4. Use on temperatures between +5 i +30 C.
5. Surface needs to dry for at least 30 minutes, and it is completely dry after 24 hours.
   

Liquids are not poisons!
Preparation: <0.4% disodium met silicate, pent hydrate.
Protection: siloxan, >87% ethanol, ca. 0.3% methanol.

Set 30 ml (preparation bottle 30 ml, protection bottle 30 ml, sponge, cloth, instructions) – for 3-4 m2
Set 50 ml ( preparation bottle 50 ml, protection bottle 50 ml, sponge, cloth, instructions) – for 5-6 m2
Set 100 ml (preparation bottle 100 ml, protection bottle 100 ml, sponge, cloth, instructions) – for 10-12 m2

Larger packaging (250 ml, 500 ml, 1000 ml i dr.) upon request!

Click on the thumbnail opens full size image !!!

1.	2.	3.
4.	5.	6.