PLENTI'S NANO 4 CAR PAINT is an excellent product based on nanotechnology for car paint protection with following characteristics:

1. Regardless of the weather your vehicle can be clean. Five minutes is enough for washing, no matter what kind of dirt is in question.
2. It is a long-lasting protection - minimally 30.000 km or 1 year.
3. Protection allows the paint to last longer, regardless of sun, rain, snow, ice, salt etc.
4. Flies and other dirt can be removed far more easily.
5. For maintaining the paint clean water is enough, there are no other chemicals required.
6. It is an ecological product!

The liquid for car paint protection contains intelligent nano particles. After nano particles are being applied and spread on the prepared surface, by quality polishing required temperature and energy are released which allow nano particles to merge with surface on a molecular level.

That way, extremely smooth surface of condensed particles has been created, which does not allow liquid or dirt to pass through. Thanks to that nothing can affix to the surface, so removing of any kind of layers is simple.

 

Work only on smaller areas, 50 x 50 cm for example. For every new area repeat the steps from 5-8. During appliance of nano cleaner it could seem that the paint is scratched. The reason is that nano cleaner opens the paint, but nano protection will close it.

PREPARATION

1. Remove the dirt completely from your vehicle.
2. Shake well Component 1 and pour it into stirring jar.
3. Shake well Component 2 and pour it into stirring jar.
4. Close the stirring jar. Shake well.

PROTECTION

5. Shake well the Nano cleaner, pour it on a sponge and apply with circular movements on the whole surface. The surface has to be completely clean. Do not touch the surface with fingers!
6. Use the cloth to polish the part you have cleaned. If you will wash it out, make sure it is completely dry prior to applying nano protection.
7. Shake well stirring jar, at least for two minutes, pour the Nano on the cloth and using circular movements rub it in on the whole surface.
8. Polish the surface with clean cloth until it is entirely clean and shiny.

 

APPLIANCE

Painted surfaces on cars, city transport vehicles, economic vehicles, railway vehicles, busses, etc.

 

IMPORTANT

We recommend wearing plastic glows for household.

1. Separated components lasts for one year, mixed for three days.
2. Keep the surface dry for at least an hour. Absolute solidness of nano protection is achieved after 24 hours.
3. Work on the surface in a dry place and on temperature between +5°C and +30°C. Avoid direct sun light (the surface will dry too fast). Any contact with water or any kind of dirt during the procedure can affect the efficiency of protection.

 

Liquids are not poisons.
Preparation: <0.4% disodium met silicate, pent hydrate.
Protection: K1 ethanol =>20%
K2 propan-2-ol > 20 %

 

 

Set for one vehicle contains:
- Preparation bottle - 200 ml
- Bottle of nano protection, component 1 (K1) – 50 ml
- Bottle of nano protection, component 2 (K2) – 50 ml
- Stirring jar
- sponge
- cloth

Larger packaging upon request!

Click on the thumbnail opens full size image !!!

1.	2.	3.	4.